Nails -Bright- Flat Head - Prepacks - 400 grm 65* 3.15mm

Nails Galv Slice Cut Staples - 500 grm 20* 2.8mm
- Can be used in cloth and wire applications
- Exterior use
- Double ended nail
The Galvanised Staple Nail is a U shaped double ended nail suitable for fixing mesh/cloth to timber frame.

Knuckle Nail Plates 6T5
Generally, Knuckle Nailplates will:
- Provide a strong, economical and easy-to-use means of jointing timber together.
- Protect timber from damage as they resist splitting due to drying of the timber, nailing near ends or other causes eg Bin Straps.
- Also reduce timber damage by resisting the effects of impact loads such as from fork lift tyne strikes.
- Distribute concentrated loads over a wider area, eg they increase the strength of bolted joints.
Knuckle Nailplates are galvanised steel connectors with in-built, bent-up “knuckle” nails. These plates are ideal for many structural and non-structural timber jointing and timber protection uses.
Among the many uses of Knuckle Nailplates, the most common are jointing of wall frames together on-site, on-site splicing of timber beams, reinforcement of corners of boxes and bins, and reinforcement of bolted joints (eg Cable Truss)

Nails Galvanised - Jolt Head Prepacks - 500 grm 40* 2.5mm
- Good corrosion protection
- Specially designed thread
- Landscaping and decking spikes
- External use
These are Timber to timber connectors for heavy duty landscaping and decking. Nail thread increases holding power. Pre drill when fixing into hardwood.