Description
PPG Sigmashield 880 Hardener 5L - 40880-BHARD/5L
- Excellent corrosion resistance - Good abrasion resistance - Resistant to well-designed cathodic protection
- Long-term protection in a single-coat application - suitable for application on exterior of buried pipes
- Suitable on wet blast or ultra-high-pressure water (UHPWW) cleaned substrates (damp or dry)
- As used by Zhenhua Heavy Industries, Co., Ltd. (ZpmC) in Nantong, China
- Available in 2200+ colours from RAL and BS
PPG SigmaShield 880 (also known as Amerlock 880) is a two-component, high-build, polyamine adduct-cured epoxy coating primarily designed for use in offshore splash zone maintenance such as pipelines, jetties, piling, etc. with outstanding sea water resistance that requires just a single coat that continues to cure when immersed in water.
— Related
PPG Sigmacover 350 Hardener 4L - 40350-BHARD/4L
PPG Sigmacover 350 Hardener 4L - 40350-BHARD/4L
- Surface tolerant primer/coating for use on steel and concrete
- Good impact and abrasion resistance, with excellent corrosion resistance
- Resistant to splash and spillage of a wide range of chemicals
- Fast-curing and compatible with various aged coatings
- Smooth film, easy to clean
- See below for more information on surface preparation, application details and curing times
SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 350+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds.
PPG Sigmarine 48 Base Z 15.8L - 40048-TBASZ/15.8L
PPG Sigmarine 48 Base Z 15.8L - 40048-TBASZ/15.8L
- Single component.
- Use as a finish for boottop, topside, deck and also deck equipment.
- A quick-drying, hard, tough finish.
- Water and also weather resistant.
- Moderate gloss retention.
- Apply over most intact alkyd paints.
- Use in areas intermittently exposed to water-immersion and atmospheric conditions.
- Also available with non-skid material for use on deck surfaces.
- Thinner & Cleaning: 20-05.
Sigmarine 48 is a general purpose gloss finish based on modified alkyd resin. Use it on the boottop, topside, deck and also the deck equipment. It is a hard, tough, durable product which is specifically suited to areas intermittently exposed to water immersion and also atmospheric conditions.
PPG Sigmadur 188/520/550 Hardener 2.4L - 40550-BHARD/2.4L
PPG Sigmadur 188/520/550 Hardener 2.4L - 40550-BHARD/2.4L
- Easy application by roller and airless spray
- Unlimited recoatable
- Excellent resistance to atmospheric exposure conditions
- Good color and gloss retention (aluminum version becomes grey)
- Non-chalking, non-yellowing
- Cures at temperatures down to -5°C (23°F)
- Tough and abrasion resistant
- Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals
- Can be recoated even after long atmospheric exposure
Two-component, high-build semi-gloss aliphatic acrylic polyurethane finish
PPG Sigmacover 350 Hardener 4L - 40350-BHARD/4L
PPG Sigmacover 350 Hardener 4L - 40350-BHARD/4L
- Surface tolerant primer/coating for use on steel and concrete
- Good impact and abrasion resistance, with excellent corrosion resistance
- Resistant to splash and spillage of a wide range of chemicals
- Fast-curing and compatible with various aged coatings
- Smooth film, easy to clean
- See below for more information on surface preparation, application details and curing times
SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 350+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds.
