Description
Sikaflex Tank N
High chemical resistance ▪
High mechanical resistance ▪
Movement capability of ± 25% (ISO 9047)Good application properties
Sikaflex® Tank N is supplied ready to use. After suitable substrate preparation, insert backing rod to the required depth and apply primer if necessary. Insert foil pack into sealant gun and extrude Sikaflex® Tank N into joint making sure that it is in full contact with the sides of the joint and avoid air entrapment.
— Related
Sikaflex Construction - Concrete Grey 600 ml
Sikaflex Construction - Concrete Grey
- One component, ready to use
- Weather resistance, excellent aging resistance
- Non Corrosive
- Movements capability /- 25% of average joint width at time of sealing
- Very good adhesion to many substrates
- Excellent workability
- High tear resistance
Sikaflex® Construction (AP) is a one part, moisture curing, elastic joint sealant based on polyurethane. It is suitable for indoor and outdoor applications.
Sikaflex-Pro - Concrete Grey 600 ml - 720854068L
Sikaflex - Pro - Concrete Grey
- Movement capability of ± 35% (ASTM C 719)
- Solvent-free, Low VOC
- Good workability, Early initial set
- Non Sag
- Bubble free curing – i-Cure technology
Sikaflex® Pro+ is a 1-component moisture curing polyurethane elastic sealant and adhesive that is formulated on Sika’s newly engineered i-Cure technology to provide higher performance, more movement capability and improved bubble-free curing.
Sika’s new i-Cure technology is user and eco-friendly with no solvents and low environmental impact and the performance of traditional polyurethane. It is suitable for over painting with traditional paint coatings. The i-Cure® technology has an early initial set and overcomes bubbling in sealant while curing even in extreme conditions.
Sikaflex® Pro+ is a high performance, interior and exterior elastic joint sealant with excellent water, weather and ageing resistance. It has many uses, including; expansion joints in walls and cladding, sealing around doors and window frames, sealing penetrations in walls and floors for pipes, sealing joints in concrete and masonry elements, as a sealant for draught proofing and general sealing and filling applications.
Sika Cure Crete 10 Ltr
Sika Cure Crete
Description Sika® CureCrete is a water based membrane forming liquid for curing, ... Sika® CureCrete is suitable for use over new and old concrete and performs well both inside and outside without the adverse effects of solvent based systems.
Forms an efficient moisture barrier for optimum curing of concrete. Protects concrete surfaces by promoting proper cement hydration. Helps eliminate dusting through good strength development. Dries to clear transparent film that resists yellowing under exterior exposure.
Sikaflex 11FC Grey 310ml
Sikaflex 11FC Grey
- Excellent adhesion to all cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin
- Fast cure rate
- Good weathering and water resistance
Sikaflex®-11 FC is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity. This dual-purpose material is based on a special moisture-cured polyurethane with an accelerated curing time that meets ASTM C920 Type S, Grade NS, Class 12.5 for internal and external applications.
